Monthly Archives: April 2012

Reinforced Concrete Products

Concrete products (JBI), through his own extraordinary strength, longevity and richness of the set, take up very special space among other advanced building materials. Reinforced concrete is a combination of Concrete and steel reinforcement, monolithic integrated and working together in the system. For the production of ferro-concrete products plant in Ufa – the concrete mix reinforced with iron rods connected to the frames. This synthesis of concrete and steel allows you to combine the best quality there is in these two materials that were used immediately to compensate for their shortcomings. The term 'concrete' is used quite often as the common name of the Reinforced Concrete systems and products.

Combination of reinforced concrete 2-very different qualities of their own materials based on the fact that the solidity of concrete in tension substantially (10-20 times) lower than in compression, so concrete system he designed for the perception of compressive forces, the same steel, which owns the highest passing resistance in tension and introduced into the concrete in the form of reinforcement, the main way used to perceptions of tensile forces. The interaction of different materials so very well: concrete hardening firmly adheres to the metal and solid piece of iron protects it from rust, monolithic concrete and reinforcement guaranteed more conventional narrow-mindedness of their coefficients of thermal expansion (for concrete from the 7, 5 * 10-6 * 10-6 to 12 for metal reinforcement 12 * 10-6); within the temperature changes from -40 to 60 C, the main physical mechanical properties of concrete and reinforcement actually does not change that allows the use of concrete in all climate zones. The extensive spread of concrete in modern construction is due to his great technical and financial supremacy in comparison with other materials. Built of reinforced fire-resistant and reliable, require no special protective measures against the depleting action of weather; solidity of concrete increases with time, and valves can not be rust, being located around its protected with concrete. Reinforced concrete has the highest load-bearing ability, excellent accepts static and dynamic (including seismic) overload. Of conventionally reinforced concrete buildings and build a just system of multiple forms of reaching the grand construction of expression. The main volume of reinforced concrete are everywhere where is possible only known materials – crushed stone, gravel and sand. Using precast concrete can substantially increase the degree of industrialization of construction, systems are made in advance on the well-equipped factories, and the operation areas Installation is only ready-made pieces of mechanized means.

Thus supported the highest rate of construction of houses and buildings, and even saving foreign exchange and labor costs. The main advantage of reinforced concrete products – this is greater solidity of the simplicity of making the system the desired configuration, shape, size. Spacious range of species (solid, prefabricated, box-solid, heavy, light, mesh, ordinary, pre-stressed, etc.) permit the use of concrete products for the manufacture of various building systems. It rings, plates (plates road, floor slabs, airport board), base blocks, piles, electric poles, and much, much more. One of the most popular products are now reinforced concrete slabs. They are used to build floors in large-panel buildings. Made from concrete slabs of any structure (both heavy and light) – all located in Depending on the overload, which is obliged to transfer the tile floor. Because they are used in the construction of a small conventional buildings and the construction of large-scale objects with a large carrier overload which is on the shoulder only real Titans. In fact, no housing to this day can not do without reinforced concrete products and, in particular, the floor slabs.

Block Automatic Heating Unit

– Metering and regulation of thermal energy takes into account the actual flow of coolant and adjust (reduce) the rate of the coolant in accordance with the programmed temperature maintenance systems heating and hot water or in the return pipe. – Allows the heating unit to expend heat energy in accordance with calculations that take into account: the weather, time of day, days, etc. Supports normal heating mode when there is insufficient supply of coolant from the heating network (low pressure drop and low temperatures). – Knot hot water. Allows you to pump water to the hot water supply with desired temperature (55-60 C). Works with the maximum selection of thermal energy from the thermal network.

– Unit ventilation. Allows you to adjust the flow of thermal energy in accordance with weather conditions and time of day. Effectiveness of the use – reducing heat consumption by 37% in the industrial, administrative and public buildings by 12% – in housing, by taking into account the actual outdoor temperature and low heating modes in night-time – to reduce costs to build the substation, by reducing the amount and timing of construction works, transport and procurement and overhead costs – Automatic shut-off of hot water and cessation of flow metering for emergency situations – a built-in metering and regulating heat – enables (in the application of block and individual items), go to the two-pipe system transfer fluid from heat supply networks. The classification of substations and the main concepts Substations to thermal networks can be connected in two basic concept: the dependent and independent schemes. The set of block heating stations include: metering and regulating heat exchangers plate, pumps, circulators, Valves, filters, strainers, check valves, instrumentation equipment, automation control panels work of appliances and equipment, technical documentation required for the installation and operation of btp.

Intelligent Scene Selector

Panasonic is proud to announce the completion of the next line of cameras Lumix – 10,1-Megapixel DMC-FS7 and 8.1-megapixel DMC-FS6, equipped with bright Leica DC lens with F2.8 aperture and 4x optical zoom (33-132 mm in 35 – mm equivalent). Intelligent Auto mode, which gives its new Panasonic camera, greatly simplifies the process of shooting and reduces configuration errors. Improved lens in these models, which allowed make the camera body is incredibly thin, meets the highest standards of Leica and demonstrates exceptional optical performance. Camera DMC-FS7 features a large 2.7 "(2,5" for DMC-FS6) LCD screen with high resolution 230 000 pixels for easy control of shooting and playback recorded images. Intelligent LCD Screen (Intelligent LCD) sets out the conditions of exterior lighting and automatically boosts brightness by up to 40% when shooting in sunny day outside, but in low light adjusts the frame rate. In addition, in such situations the method of pixel-mixed readout to increase the visibility of the image.

On-screen menus in the new models have become more distinct and easier to navigate. Both models DMC-DMC-FS7 and DMC-FS6 allow you to play recorded images in a slide show with musical accompaniment. All Lumix cameras can record still images High Definition 1920 x 1080 pixels, perfect for viewing on a widescreen TV, HDTV 16:9 format. User is offered a choice of icons that will show that the subject is in focus. You can choose any of them – the usual point, a flower, a car or other form you like.

In addition, the arsenal of functional models FS6 FS7 and added a new mode of "Photo Frame", which allows you to decorate pictures beautiful setting. When printing these images will look like real cards, and you will be pleased to give them to friends. Another mode of customization – My Song (My Scene) – allows you to select two the most popular scene modes so you can instantly switch between them on camera. Panasonic is pleased to offer a new 12.1-megapixel digital camera for a series of Lumix FS – DMC-FS25 from 29-mm wide angle Leica DC lens and 5x optical zoom (29 to 145 mm in 35-mm equivalent) with a large 3-inch display. In the model, DMC-FS25 Intelligent Auto mode is enhanced by features AF Tracking * (Auto Tracking), and Intelligent Exposure (Intelligent Exposure). In addition, face detection (Face Detection), the possibility of adjusting the digital red-eye. " In iA mode the camera does everything himself, including autofocus, a function Mega OIS (Optical Image Stabilizer), Intelligent ISO Control (Intelligent Control Sensitivity ISO), Intelligent Scene Selector (Intelligent Scene Selector) and the mode of Intelligent Exposure (Intelligent Exposure). Panasonic will also represent the camera DMC-FS15 with 2.7-inch 230,000-dot Intelligent LCD, the model in the same line with the DMC-FS25. This camera is equipped with a 29 mm ultra wide-angle lens Leica DC Vario-Elmar with a powerful 5x optical zoom (29-145 mm) * in a compact housing, as well as in all other cells present iA Intelligent Auto mode for still images, including autofocus, face detection, Optical Image Stabilizer, Intelligent adjustable sensitivity ISO, Intelligent Scene Selector, Intelligent Exposure, as well – superfast high-performance image processing Venus Engine IV. Life is so beautiful! The most important moments of life will help you capture Lumix camera from Panasonic! Merry you leave!

Housing Construction

For integrated development of land for housing construction (apparently, when there is no plot and advanced engineering training infrastructure available in the cases stipulated in Article 38.1) auctions are regulated by Article 38.2 of the LC RF. In the cases provided for in Article 38.1 of the RF LC, the seller determines the initial price of the auction, as which is chosen: the sale of ownership of the land – the initial price of the land, and the sale of the right to conclude a contract to lease – initial size of the rent. The auction organizer shall keep the minutes auction in which the last sentence of fixed costs from owning land or on the amount of rent. In auctions, regulated by Article 38.2, the seller (the organizer of the auction) provides: the initial price of the land or the initial price of the right to conclude a lease of land – along with the size of the rent for the land for the duration of the lease. The winner of the auction acknowledged his party, who offered the highest bid for the right to conclude lease contract for its integrated development – at a given rental rate for the entire period of the lease. So , the measure of the value of the right to conclude a lease contract is a cash amount equal to: Article 38.1, the size of the rent, and Article 38.2 – the price of the right to conclude a lease – at a specified rate rent for the duration of the lease.