Several years ago, when there was a pressed steel deck, he made a revolution in construction and manufacturing of steel, thanks to a beautiful appearance, ease of installation, low cost production, pressed steel deck easily replaced expanded metal sheet (PVL) is used as floor slabs and steps in the construction industry. But technology does not stand still and today there is a new technical solution to be used as an alternative to steel decking – this outdoor decks on the basis of fiberglass. Scope of plastic decking as similar to the metal pressed decks, but they have some undeniable advantages, it is primarily a lower weight of the product that has a positive effect on the total weight of manufactured structures, they do not spend electric current, high resistance to bending and impact after falling on a deck heavy object, he, unlike his fellow metal takes its original shape while the iron floor is deformed and damaged section needs to be replaced, and again, the low cost of production. Little about the technology of production. Plastic decking despite its name actually are not, production technology decking on the basis of glass fiber strands is as follows: a specially made form fits a frame made of fiberglass strands in a grid, and then filled with a special epoxy resin that then with further heat treatment hardens, then cools and is removed from the mold all the product is ready, the decks of your choice may be different colors blue red yellow green, etc. to the same pluses the technology does and what a lattice is obtained by monolithic. Due to the use in the manufacture of plastic material produced in this way produce its appearance is limited only by your imagination, as well As the steel decking above method produced stairs railings, vertical ladders and handrails. There are a variety of plastic decking is first and foremost in the industry platforms, passages, stairs, livestock farms, in construction of multi-storey to the private sector. When using any article direct active link to the source required!